The SPS-S Full Outdoor is MEINS’s string-type Solar Power Station in its fully weatherproof version: a compact power station designed to be installed directly outdoors at photovoltaic and storage plants. It is the highest-power variant of the SPS-S range and is intended for projects that need to concentrate generation and power evacuation in a single robust, self-contained unit ready for demanding outdoor conditions.
Its design is based on a customised, adaptable approach according to the project’s technology, so that the configuration is tailored to the architecture of each plant. The entire solution is fully suitable for outdoor use and its components are certified for weather-exposed operation, enabling it to run without the need for an additional building or enclosure to protect it.
On the civil works and environmental side, the SPS-S Full Outdoor incorporates an oil containment tank integrated into the frame itself, which significantly simplifies civil works by eliminating external bunds and pits. It is fitted with oil-filled transformers, both mineral and vegetable, and adopts an SF6-free design up to 24 kV, in line with the latest environmental and safety requirements.
On the electrical and control side, it features a customisable low-voltage panel, compatible with both solar string inverters and battery PCS, making it suitable for both photovoltaic plants and storage systems. The connections come factory-integrated, reducing labour and minimising on-site risks during installation.
In terms of performance, the SPS-S Full Outdoor reaches up to 10 MVA and up to 40.5 kV, and is compatible with most brands and models of string-type inverters. It is the ideal choice when maximum power from the string range is required in an outdoor-ready unit, with minimal civil works and fast deployment. Operating range: up to 10 MVA and up to 40.5 kV.
The SPS-S Semi Outdoor is MEINS’s string-type Solar Power Station in a semi-weatherproof configuration: a compact, turnkey power station that balances protection and cost for mid-sized photovoltaic plants. It sits as the intermediate step in the SPS-S range, offering a higher level of protection than the fully outdoor version while maintaining ease of installation.
Like the rest of the family, it is a compact turnkey solution, with a customised design and adaptability to suit the requirements of each project. Its enclosure is made of concrete, which provides structural robustness and protection for the equipment it houses.
Its value proposition centres on deployment efficiency: the SPS-S Semi Outdoor optimises civil works and delivers major savings in installation time, along with guaranteed risk and quality control derived from the integration and testing carried out at the factory before arrival on site.
In terms of performance, it reaches up to 5 MVA and up to 40.5 kV, and is compatible with most brands and models of string-type inverters. It is the ideal choice for plants seeking a compromise between concrete protection and contained cost, with fast installation. Operating range: up to 5 MVA and up to 40.5 kV.
The SPS-S Semi Indoor is MEINS’s string-type Solar Power Station in a semi-indoor configuration: a compact, turnkey power station that increases the level of equipment protection compared with the outdoor versions, while maintaining the compact format characteristic of the SPS-S range.
It is delivered as a compact turnkey solution, with a customised design and adaptability for each project, and with a concrete enclosure that protects the switchgear inside. This higher level of shielding makes it suitable for sites where reinforced protection of the components is required.
Like the rest of the family, the SPS-S Semi Indoor optimises civil works, provides major savings in installation time and offers guaranteed risk and quality control, thanks to prior integration and testing at the factory.
In terms of performance, it reaches up to 4.7 MVA and up to 40.5 kV, and is compatible with most brands and models of string-type inverters. It is the ideal choice when a project prioritises a higher level of equipment protection without sacrificing the fast deployment of the string range. Operating range: up to 4.7 MVA and up to 40.5 kV.
The SPS-S Full Indoor is MEINS’s string-type Solar Power Station in a fully indoor configuration: a compact, turnkey power station that offers the highest level of equipment protection within the SPS-S range. It is designed for projects that require all the switchgear to be housed under cover, in an enclosed space that fully shields the components.
It is delivered as a compact turnkey solution, with a customised design and adaptability, and a concrete enclosure that provides the comprehensive protection characteristic of this version. It is the most shielded variant of the string family, suitable for environments where ambient conditions or project requirements call for fully covered equipment.
Like the rest of the range, it optimises civil works, delivers major savings in installation time and offers guaranteed risk and quality control, resulting from the integration and testing carried out at the factory.
In terms of performance, it reaches up to 1.25 MVA and up to 40.5 kV, and is compatible with most brands and models of string-type inverters. It is the ideal choice for installations that prioritise full equipment protection in a compact, fast-deployment format. Operating range: up to 1.25 MVA and up to 40.5 kV.
The SPS-C is MEINS’s Central Power Station: a compact, turnkey power station aimed at renewable generation plants that need to concentrate greater power in a single central unit. Unlike the string range (SPS-S), the SPS-C is conceived as a central station, suitable for plant architectures that group power conversion and evacuation into higher-capacity stations.
It is delivered as a compact turnkey solution, with a customised design and adaptability according to the requirements of each project, and a concrete enclosure that provides robustness and protection for the integrated equipment.
In terms of deployment, the SPS-C optimises civil works, provides major savings in installation time and offers guaranteed risk and quality control, thanks to integration and testing at the factory before on-site installation.
In terms of performance, it reaches up to 7.7 MVA and up to 40.5 kV, and is compatible with most brands and models of string-type inverters. It is the ideal choice for plants requiring a compact central power station, with fast deployment and minimal civil works. Operating range: up to 7.7 MVA and up to 40.5 kV.
The BPS-C (Central) is MEINS’s central-type Battery Power Station: a prefabricated transformer station equipped with a central inverter and designed to connect to a battery container. Within the BPS family, it is the variant aimed at storage architectures that centralise power conversion in a single inverter, rather than distributing it across string inverters.
Its distinguishing feature is that it incorporates a central inverter, in a Power Electronics or SMA model, integrating the conversion electronics into the station itself. This approach makes it suitable for storage installations that opt for a centralised inverter topology.
The BPS-C offers a maximum capacity of up to 5 MW and is designed to connect to a battery container, acting as the link between the storage system and the grid. By being delivered as a prefabricated transformer station with the inverter already integrated, it reduces integration complexity and fieldwork.
The BPS-C (Central) is the ideal choice for battery storage projects that use a central inverter architecture, where the aim is to concentrate power conversion in a single unit integrated into the transformer station. Maximum capacity: up to 5 MW, with a central inverter (Power Electronics or SMA) and connection to a battery container.
The BPS-C (Central) is MEINS’s central-type Battery Power Station: a prefabricated transformer station equipped with a central inverter and designed to connect to a battery container. Within the BPS family, it is the variant aimed at storage architectures that centralise power conversion in a single inverter, rather than distributing it across string inverters.
Its distinguishing feature is that it incorporates a central inverter, in a Power Electronics or SMA model, integrating the conversion electronics into the station itself. This approach makes it suitable for storage installations that opt for a centralised inverter topology.
The BPS-C offers a maximum capacity of up to 5 MW and is designed to connect to a battery container, acting as the link between the storage system and the grid. By being delivered as a prefabricated transformer station with the inverter already integrated, it reduces integration complexity and fieldwork.
The BPS-C (Central) is the ideal choice for battery storage projects that use a central inverter architecture, where the aim is to concentrate power conversion in a single unit integrated into the transformer station. Maximum capacity: up to 5 MW, with a central inverter (Power Electronics or SMA) and connection to a battery container.
The BPS-D (Decoupled) is MEINS’s decoupled Battery Power Station: a prefabricated transformer station designed to connect directly to battery containers that already have their own integrated inverter system. It is the variant of the BPS family intended for commercial storage solutions that incorporate the conversion electronics from the factory.
Its defining feature is precisely that “decoupled” nature: since it does not need to provide the inverter, the BPS-D connects directly to battery containers such as the Tesla Megapack or Powerpack, which already include their own integrated inverter system. The station thus focuses on the transformer and connection function, complementing these turnkey storage systems.
This approach simplifies the project architecture when the battery container already comes with its own power electronics, avoiding duplication of the inversion function and facilitating integration with standardised storage products available on the market.
The BPS-D (Decoupled) is the ideal choice for storage projects based on commercial containers with their own inverter (such as the Tesla Megapack or Powerpack), where a prefabricated transformer station is needed that couples directly to them. Designed for direct connection to battery containers with an integrated inverter system (e.g. Tesla Megapack or Powerpack).
Up to 10 MVA | Up to 40,5 kV
Compatible with most of the string inverter brands and models
Up to 5 MVA | Up to 40,5 kV
Compatible with most of th string inverter brands and models
Up to 4,7 MVA | Up to 40,5 kV
Compatible with most of the string inverter brands and models
Up to 1,25 MVA | Up to 40,5 kV
Compatible with most of the string inverter brands and models
Up to 7,7 MVA | Up to 40,5 kV
Compatible with most of the string inverter brands and models
This transformer station is designed to connect to a battery container equipped with integrated string inverters. The power capacity is fully customizable, depending on the specifications and capacity of the battery container, with a maximum power capacity of up to 7 MW.
Up to 7,7 MVA | Up to 40,5 kV
Compatible with most of the string inverter brands and models
This transformer station is equipped with a central inverter (power electronics or SMA model). The maximum capacity is up to 5MW and is designed to be connected to a battery container.
Up to 5 MVA | Up to 40,5 kV
Compatible with most of th string inverter brands and models
This transformer station is designed to be connected directly to a battery container such as Tesla Megapack or Powerpack which count with their own inverter system integrated.
Up to 4,7 MVA | Up to 40,5 kV
Compatible with most of the string inverter brands and models
Hasta 52 MVA | 5000 A | 40 kA/3s
Celdas de media tensión primarias o secundarias
Hasta 1 kV | Hasta 2×3200 A
Compatible con la mayoría de marcas y modelos de inversores tipo string
Esta estación transformadora está diseñada para conectarse a un contenedor de baterías equipado con inversores string integrados.
La capacidad de potencia es completamente personalizable, dependiendo de las especificaciones y capacidad del contenedor de baterías, con una capacidad máxima de hasta 7 MW
Up to 7,7 MVA | Up to 40,5 kV
Compatible with most of the string inverter brands and models
Esta estación transformadora está equipada con un inversor central (modelo de Power Electronics o SMA).
La capacidad máxima es de hasta 5 MW y está diseñada para conectarse a un contenedor de baterías.
Up to 5 MVA | Up to 40,5 kV
Compatible with most of th string inverter brands and models
Esta estación transformadora está diseñada para conectarse directamente a un contenedor de baterías, como el Tesla Megapack o Powerpack, los cuales cuentan con su propio sistema de inversor integrado.
Up to 4,7 MVA | Up to 40,5 kV
Compatible with most of the string inverter brands and models
